|
Items Included
|
| Qty |
Part No. / Item |
| 1 |
115-3136 Abrader
Mild abrasive for removing oxides and contaminants.
|
| 2 Pkg/5 |
115-3312 Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
|
| Pkg/10 |
115-3702 Abrasive Pads
Light duty abrasive scrubbing pads to remove contamination and blend surfaces.
|
| 3 |
115-3721 Plating Anode, Standard
Pre-wrapped, screw-on plating anode designed for circuit board plating.
|
| 3 |
115-3722 Plating Anode, Small
Small plating anode designed for circuit board plating.
|
| Pkg/10 |
115-3733 Plating Anode Tip
Absorbent foam tip used with small plating anode.
|
| 1 |
115-3742 Plating Cables, Black/Red
Standard test lead cables with stackable banana plugs.
|
| 1 |
115-3754 Plating Probe, Black
Nylon plating probe used for ground connection during plating.
|
| 3 |
115-3755 Plating Probe, Red
Nylon plating probe for use with plating anodes.
|
| 1 |
115-3778 Buss Wire, 30 AWG
Used to create buss connection during plating.
|
| 1 |
115-3782 Rinse Bottle
4 ounce rinse bottle made from low-density polyethylene.
|
| 1 |
115-3821 Plating Solution, Gold, 1 oz (.03 liter)
Electroplating solution for gold surfaces and gold edge contacts.
|
| 1 |
115-3831 Plating Solution, Nickel, 1 oz (.03 liter)
Electroplating solution for nickel surfaces and nickel edge contacts.
|
| 1 |
115-3841 Plating Solution, Electroclean, 1 oz (.03 liter)
Solution for preparation prior to electroplating.
|
| Pkg/5 |
235-2102-5 Foam Swab, Small
Swabs for use with solvents, color agents, and epoxies.
|
| Pkg/5 |
235-2108-5 Foam Swab, Large
Swabs for use with solvents, color agents, and epoxies.
|
| 1 |
245-1102 Conductive Pen
Pen dispenser for creating conductive silver traces.
|
| 1 |
250-1201 Coating Remover Pen
For precise removal of silicone, acrylic and urethane coatings from circuit boards.
|
| 1 |
290-3050 Tape, Plating and Masking
Ideal for masking during plating, coating removal and microblasting.
|
| 1 |
290-7250 Tape, Peel Test
This tape is specifically designed to test plating adhesion.
|
| 1 |
355-0614 Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
|
| 1 |
510-2408 Alligator Clip
Use to provide ground connection.
|
| |
| Power Options |
| Qty |
Part No. / Item |
| 1 |
115-1714 Power Supply, 120 VAC
Multi Voltage Regulated Power Supply
|
| 1 |
115-1716 Power Supply, 230 VAC
Multi Voltage Regulated Power Supply
|
* 201-6100 Gold Contact Plating Kit, 120 VAC includes 115-1716 Power Supply, 120 VAC
* 201-6100 Gold Contact Plating Kit, 230 VAC includes 115-1716 Power Supply, 230 VAC |
