250-1201 Coating Remover Pen
Coating remover pen designed for precise removal of silicone, acrylic and urethane conformal coatings from circuit boards. The fast-acting, non-corrosive formula softens coatings for easy removal during PCB repair and rework preparation. The liquid has rapid evaporation, and is non-ozone depleting.
Directions: Depress the pen tip on a hard surface to dispense the coating removal fluid. Apply the fluid over the coating to be removed. Wait for the coating to soften and remove. Reapply if needed. Properly clean or reapply coating as needed.
|
| Specifications |
| Physical State | Liquid |
| Color | Clear, colorless |
| Odor | Aromatic odor |
| Flashpoint and Method | 6°F (-14.4°C) |
| Boiling Point | 149°F (65°C) |
| VOC | 886-891 g/l |
| Shelf Life | 5 years |
Material Safety Data Sheet
|
| Classifications |
| Harmonize Code |
9608.20.0000 |
| Export Administration Regulations (EAR) |
EAR99 |
| Export Control Classification Number (ECCN) |
Not Applicable |
|
|
