First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
  
Big Time Damaged Conductor Repair More Features
Big Time Damaged Conductor Repair
Figure 1: X-ray of subject location with out damage.
WOW! A batch of circuit boards were drilled in a spot they weren't supposed to be drilled. This can be a tough mistake to recover from when dealing with today's complex, multi-layer circuit boards.

Figure 1 is an x-ray of a board before the inadvertent drilling. Figure 2 is an x-ray of what this location looked like after the drilling. As a result, the customer found himself with a scrap heap of worthless product.

What to do? As you can see by the x-rays, the area drilled had many circuits running through it. In addition to the top and bottom surfaces, there were four internal layers. Despite the complexity, big-time damage like this can be repaired. The approach we took was like the answer to the question, "How do you eat an elephant? - One bite at a time."

Big Time Damaged Conductor Repair
Figure 2: X-ray of same area after drill damage.
That is we had to do in this case, rebuild the location, one connection and one layer at a time.

The first step - if you can believe it - was to drill again (Figure 3). We drilled a slightly larger hole to so we could manufacture a replacement plug that will be a uniform shape for all the holes in the batch of circuit boards.

Next we began to re-construct the internal layers. A specially machined plug was inserted and bonded in the hole to replace the core inner-layer of the board. Once that piece was cured, the internal circuitry that occupied the space on either side of the core was replaced.
Big Time Damaged Conductor Repair
Figure 3: Hole re-drilled.


Each internal circuit needed to be individually tinned and soldered. We used a special ribbon shaped copper conductor called a circuit track. See http://www.circuitmedic.com/products/201-3130.html.

The circuits also needed to be insulated from the power and ground planes that may run through the area. After the internal traces were connected and tested, each open side of the plug was filled to the top and bottom surface with high strength thermo setting epoxy.
Big Time Damaged Conductor Repair
Figure 5: Replaced internal conductors and some surface conductors.
Big Time Damaged Conductor Repair
Figure 4: Replaced internal conductors.
Figures 4 and 5 show the specially manufactured dowel plug bonded in place and the replacement circuit tracks either laying on the dowel surface (internal traces) or suspended in place (top and bottom traces). In this case, the circuit tracks for all layers were connected prior to the epoxy fill.

Finally, top and bottom surfaces were blended cosmetically to complete the repair. Figures 6 and 7 show the bottom and top sides of repaired boards.

Big Time Damaged Conductor Repair
Figure 7: Completed repair.
Big Time Damaged Conductor Repair
Figure 6: Completed board.


That's it! Believe me this was one tough repair yet post repair testing proved that the repaired units worked as designed.

We're mighty proud of our team of techs who had the patience, skill and discipline to undertake such a challenging project, and do so successfully.
Several members of the Circuit Technology Center team contributed to this feature story.
Six Fast Fixes for Circuit Boards
Six Fast Fixes for Circuit Boards
Use this versatile kit to fix damaged SMT pads, lands, gold edge contacts, conductors, plated holes and base board. It's the total package.
Learn more ...
6 Common Mistakes of BGA Rework
6 Common Mistakes of BGA Rework
BGA rework is a very challenging procedure. Doing it right depends in large part on the skills and knowledge of the rework technician.
Learn more ...
Circuitry Repair on Multilayer PCBs
Circuitry Repair on Multilayer PCBs
Learn about services to repair severe damage to conductors and plated holes, including damaged holes in multilayer PCBs.
Learn more ...
Perfect Kit for Replating Gold Contacts
Perfect Kit for Replating Gold Contacts
There's simply no reason to scrap circuit boards when they have contacts contaminated with solder. Restore them using the Gold Contact Plating Kit.
Learn more ...
ipc-logo Circuit Technology Center has been an IPC member since 1986
Circuit Technology Center Logo
Surgeon grade rework and repair,
by the book and guaranteed. ®