First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
  
Trimming Conductors in Very Tight Places More Features
Trimming Conductors in Very Tight Places
Figure 1: Knife blades are often modified for precision jobs.
Anyone familiar with high-frequency and microwave printed circuits understands the sensitive design considerations each requires. Occasionally, you may encounter the need to reduce a circuit or conductor width when a pad or conductor is violating space requirements.

This type of modification is an extremely delicate operation requiring not only the hands of a surgeon, but may require the use of customized tools modified specifically for the application.

Recently, we were presented with such a challenge. We were asked to remove a section of a pad to provide the specified separation of the pad from a conductor running close by.

We normally would make such a cut with a standard carbide cutter and milling machine, but controlling the depth of the milling would have been difficult on this particular project.

Using a common precision knife to cut and remove the section was the method we used, but with a twist. We modified the knife blade and placed it into milling machine. (See Figure 1).

Trimming Conductors in Very Tight Places
Figure 2: Knife is placed in a milling machine. Milling machine is not turned on, it is used to precisely control the movement of the knife.
A special fixture to support the board, was developed. The modified blade was placed in the knife, and the knife was installed into the collet of the milling machine.

The milling machine was never turned on, it was just used to precisely control the movement of the knife. You might expect we would cut completely through the entire depth of the pad on the first pass - not so! If we did we may have cut too deep, causing a "crazing" of the base board material, and thus, damage. Even the slightest penetration of the base material, beyond the depth of the pad may have caused damage.

Thus the milling system was set to cut three-fourths of the way through the pad. The final pad material was removed by hand allowing for a more controlled removal, without damaging the adhesion of the remaining pad. Modifying standard knife blades is not difficult and can be accomplished using grinders and files.

This is a special modification calling for special tools and fixtures. A milling machine, or similar precision coordinate systems is also needed.
Several members of the Circuit Technology Center team contributed to this feature story.
Are Your BGA Rework Techs Competent?
Are Your BGA Rework Techs Competent?
Can every operator handle your BGA rework equally well? In real life, in all but just a few situations, the answer is no. Why is this so?
Learn more ...
11 Rules for Circuit Board Mods
11 Rules for Circuit Board Mods
Some of the odd twists and turns occasionally needed to modify assembled circuit boards can be surprising. Discover the 11 rules your techs should know.
Learn more ...
Must Have Circuit Boards First-aid Kits
Must Have Circuit Boards First-aid Kits
These kits have been used for decades by the most demanding electronics manufacturers. Every item is thoroughly field tested.
Learn more ...
Can You Repair a Broken Corner?
Can You Repair a Broken Corner?
What happens to an assembled circuit board with a broken corner? Can it be repaired reliably? It can if you have the training and the experience.
Learn more ...
Challenging Surface Mount Pad Repair
Challenging Surface Mount Pad Repair
Surface mount and BGA pad repair are routine operations at Circuit Technology Center. Learn how it's done with absolute precision and reliably.
Learn more ...
Do Your Repair Techs Deserve One?
Do Your Repair Techs Deserve One?
The Micro-Drill is the ideal tool for precision drilling, grinding and cutting on circuit boards. Use it to remove coatings, cuts circuits, drills holes, and much more.
Learn more ...
87 Repair/Rework Guides Free Online
87 Repair/Rework Guides Free Online
This free online guidebook, packed with detailed illustrations, will be helpful to anyone who needs to repair or rework circuit board assemblies.
Learn more ...
BGA Component Rework Simplified
BGA Component Rework Simplified
When you have tough BGA rework, where do you turn to? Discover the nation's #1 contractor for outsourced BGA rework, repair and reballing.
Learn more ...
Stop PCB Scrap Today
Stop PCB Scrap Today
What happens to your valuable circuit boards when they're damaged? Can they be repaired reliably and cost-effectively? Yes, if you have the skills and knowhow.
Learn more ...