First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
  
How Reliable Is Your Rework? More Features
How Reliable Is Your Rework?
Is it possible to reliably repair this level of base board damage?
Can you fix a broken corner on a circuit board reliably? Do you consider re-balling ball grid array (BGA) components to be a reliable procedure? Should you attempt to repair a damaged plated hole with an inner layer connection?

Your opinion and experiences with issues such as these are important, since the reliability of most circuit board repair and rework procedures are a matter of industry consensus. So, how do you know if a rework procedure will produce a reliable result?

Most rely on a concept and term known as conformance level. The IPC defines conformance level as an indicator of how closely the repaired or reworked circuit board will be to the original specification - the board or assembly as it would be without damage or defect, and prior to rework.

How Reliable Is Your Rework?
Should you attempt to repair a damaged plated hole with an inner layer connection?
Conformance level has a direct bearing on reliability, and is a grading system for procedures established from industry consensus, opinion and experience. Three basic levels of conformance are applied to the end result for every rework or repair procedure.

High
Most closely duplicates the physical characteristics of the original and most probably complies with all the functional, environmental and serviceability factors.

Medium
Some variance with the physical character of the original and most likely varies with some of the functional, environmental and serviceability factors.

Low
Significant variance with the physical character of the original and most likely varies with some of the functional, environmental serviceability factors.

Per IPC 7711/7721 Guidelines, Class 3 products must use procedures rated high - unless it can be demonstrated that a lower level procedure will not adversely affect the product's functional characteristics.

Class 2 and Class 1 products should use procedures rated high for assured safety and dependability, but medium or low-level procedures can be used if it has been determined that they are suitable for the specific product's functional characteristics.
v When performing repair or rework, the goal is to follow methods and procedures that will deliver the highest level of conformance. The relationship between level of conformance and level of reliability is not direct, but an implied correlation exists.

Remember, levels of conformance are established by the collective experiences of many rework and repair practitioners in the field, and their results have been collected and documented by members of the IPC with help from such organizations as the Naval Surface Warfare Center (Crane, IN). In many cases, the individual manufacturer or contractor must determine whether or not a particular type of rework is something that should become a standard practice.

Additionally, operator skill has a direct bearing on the level of conformance achieved, as well as ultimate product reliability. Common sense comes into play, such as proper maintenance, setup and operation of equipment; proper site preparation; good process development (developing correct profile recipes for a hot-air rework machines); and avoiding improper materials usage (using one no-clean cored wire solder with a different no-clean flux).

Conclusion
Adhering to and choosing the highest level of conformance in rework and repair procedures alone won't guarantee maximum product reliability. However, highest conformance is a good philosophy to follow to obtain the best possible outcome - when combined with a high operator skill level and an efficient operation. See Guidebook Section 1.0 Foreword for more information.
Several members of the Circuit Technology Center team contributed to this feature story.
The Toughest Component Rework?
The Toughest Component Rework?
Rework of surface mount and through hole components can be a challenge. Our techs are ready to tackle your toughest rework projects.
Learn more ...
Challenging Surface Mount Pad Repair
Challenging Surface Mount Pad Repair
Surface mount and BGA pad repair are routine operations at Circuit Technology Center. Learn how it's done with absolute precision and reliably.
Learn more ...
BGA Component Rework Simplified
BGA Component Rework Simplified
When you have tough BGA rework, where do you turn to? Discover the nation's #1 contractor for outsourced BGA rework, repair and reballing.
Learn more ...
Can You Repair a Broken Corner?
Can You Repair a Broken Corner?
What happens to an assembled circuit board with a broken corner? Can it be repaired reliably? It can if you have the training and the experience.
Learn more ...
ipc-logo Circuit Technology Center has been an IPC member since 1986
Circuit Technology Center Logo
Surgeon grade rework and repair,
by the book and guaranteed. ®