6.0 Jumper Wire and Component Modification Procedures

Circuit Board Rework and Repair Guide

6.0 Jumper Wire and Component Modification Procedures

Printed Board Type: N/A
Skill Level: N/A
Conformance Level: N/A
Revision: N/A
Revision Date: N/A

	6.1 Jumper Wires Procedure covers use of jumper wires including 42 detailed illustrations and photographs.
	6.2.1 Jumper Wires, BGA Components Circuit Track Method Procedure is used to change a circuit path at a BGA site for engineering changes or modifications.
	6.2.2 Jumper Wires, BGA Components Through Board Method Procedure is used to add a jumper at a BGA site by running the jumper through a hole in the board.
	6.3 Component Modifications and Additions Procedure covers the general guidelines for modifications that involve adding components.
	6.4 Component Lead Cutting and Lifting Procedure covers the general guidelines for for modifications that involve cutting and lifting component leads.