First-Aid Kits for Circuit Boards ®
22 Parkridge Road
Haverhill, MA 01835 USA
Copyright © CircuitMedic. All rights reserved.
A Circuit Technology Center Company
Operating Instructions

Instruction No. INS889

201-3160 Heat Shield Kit
Description
This kit includes tools and materials needed to protect heat sensitive area of a circuit board during rework.

201-3160 Heat Shield Kit
235-4010 Heat Shield Blanket protecting components and a connector prior to installation of a BGA component.
235-4010 Heat Shield Blanket
These are 5" x 7" sheets of fiberglass fabric, aluminum foil laminate with a pressure-sensitive adhesive backing. Heat Shield Blanket is designed to reflect 90% of the radiant heat energy. It will withstand continuous heat in the leaded and lead-free solder melt temperature range as well as short term exposure at temperatures up to 1000°F/538°C.

Heat Shield Blanket is recommended over Heat Shield Plates for more demanding heat protection. Heat Shield Blanket can be used in conjunction with Heat Shield Plates to create more robust thermal shield with a more rigid structure.

NOTE: Heat Shield Blanket has an adhesive backing and is protected with a release liner. The release liner must be removed and discarded prior to use.
201-3160 Heat Shield Kit
235-4060 Heat Shield Plate cut to shape and held in place with High Temperature Tape.
235-4060 Heat Shield Plates
These are light gauge 5" x 7" aluminum sheets used primarily when simple heat deflection is required. Heat Shield Plates are easy to size, cut, form and bond or tape into place using the High Temperature Mask or High Temperature Tape supplied in the kit.

NOTE: Aluminum is a good conductor of heat. When using Heat Shield Plate material to deflect heat leave a small space between the Heat Shield Plate and the component or area being protected to avoid direct contact transfer of heat.

115-9010 Mask, High Temperature
This product is a high temperature, quick cure, synthetic latex, peel-able solder mask supplied in syringes with dispensing needles. This mask can be used to create free form heat shielding or used to seal the edges Heat Shield Blanket or Heat Shield Plates. Product cures at room temperature in 5 minutes. Once dried, it can be peeled off after use.

Heat Shield Kit Includes

CircuitMedic Part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
CircuitMedic Part
Heat Shield Blanket, 5" x 7"
Self-adhering aluminized heat shield.
CircuitMedic Part
Heat Shield Plates, 5" x 7"
Aluminum plates deflect heat to protect temperature sensitive areas.
CircuitMedic Part
Mask, High Temperature
High temperature quick set liquid mask.
CircuitMedic Part
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
CircuitMedic Part
Probe
Sharp dental style probe for manipulating small objects and removal of small debris.
CircuitMedic Part
Scissors, 8"
Heavy duty 8" scissors with stainless steel blades and comfort plastic grips.
CircuitMedic Part
Scraper
Hardened stainless steel tip for scraping solder mask and removing defects.
CircuitMedic Part
Tape, High Temperature
High Temperature Tape, .75" wide x 36 yards long
Reference Procedures
For detailed step by step process instructions for the following procedures.
1.0 Foreword
2.0 Basic Procedures
2.2 Cleaning
2.5 Baking and Preheating
7.0 Soldering Procedures
7.1.1 Soldering Basics
7.1.2 Preparation For Soldering And Component Removal
7.2.2 Soldering Through Hole Components, Solder Fountain Method
7.3.2 Soldering Surface Mount Chip Components, Hot Gas Method
7.4.3 Soldering Surface Mount J Lead Components Hot Gas Method
7.5.3 Soldering Surface Mount Gull Wing Components Hot Gas Method
8.1.2 Component Removal, Through Hole Components, Solder Fountain Method
8.3.2 Component Removal, Surface Mount J Lead Components, Hot Gas/Air Method
8.4.2 Component Removal, Surface Mount Gull Wing Components, Hot Gas/Air Method
9.3.1 BGA Component Rework, Eutectic Solder Ball