Safety Data Sheet 115-3851/115-3854
CircuitMedic, 22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 | Website: http://www.circuitmedic.com
CircuitMedic disclaims all liability associated with the use of this information.
Revision Date: May 10, 2016
Page 1 of 5 Pages
Section 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Plating Solution, Solder Strip
Product Numbers: 1 oz: 115-3851, 4 oz: 115-3854
Distributor: CircuitMedic
22 Parkridge Road, Haverhill, MA 01835 USA
PHONE: 978-373-1600, FAX: 978-372-5700
Emergency Response: For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident
Call CHEMTREC Day or Night
Within USA and Canada: 1-800-424-9300 CCN4877
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
Solder Strip Solution
Solder Strip Solution

Section 2. HAZARD IDENTIFICATION
Classifications: Classification according to Regulation(EC)No1272/2008
Classifications applicable to the OSHA GHS Hazard Communication Standard (29CFR1910.1200)
Emergency Overview:
Potential Health Effects:
Inhalation: Inhalation of vapors or mist, which may be produced at elevated temperature, may cause ulcers of the respiratory tract.
Eyes: Contact with eyes may cause permanent injury.
Skin: Splashes on skin, if not removed promptly, may cause redness and blistering.
Ingestion: If swallowed, may cause injury to mouth, throat, esophagus, and stomach.
Section 3. COMPOSITION, INFORMATION OR INGREDIENTS
Chemical Name C.A.S. Number Weight % OSHA PEL ACGIH TLV
Ammonium Hydrogen Fluoride 1341-49-7 10-30 N/A 2.5ppm
Hydrogen Peroxide 7722-84-1 5-10 N/A 1.0ppm
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200): Exposure Limits 8 Hours TWA (PPM)
Section 4. FIRST AID MEASURES
Inhalation: Remove to fresh air. Restore breathing if necessary. Consult a physician.
Eye Contact: Immediately flush eyes with water for at least 15 minutes, consult a physician.
Skin Contact: Wash exposed skin with soap and water, consult a physician if irritation develops.
Ingestion: Give two glasses of water or milk. Inducing vomiting by use of emetic. Get medical attention.
Safety Data Sheet 115-3851/115-3854
CircuitMedic, 22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 | Website: http://www.circuitmedic.com
CircuitMedic disclaims all liability associated with the use of this information.
Revision Date: May 10, 2016
Page 2 of 5 Pages
Section 5. FIRE-FIGHTING MEASURES
Flash Point & Method: None
Flammable Limits: LEL: N/A UEL: N/A
Autoignition Temperature: N/A
General Hazard: If all water evaporates, oxygen may be released, intensifying fire.
Fire Fighting Instructions: As in any fire involving chemicals, self contained breathing apparatus and protective clothing should be worn.
Hazardous Combustion Prod. N/A
Flammable Properties: N/A
Extinguishing Media: N/A
Section 6. ACCIDENTAL RELEASE MEASURES
Land Spill: Small spills, neutralize with lime and flush to sewer with local approval. Large spills should be contained, pumped to salvage tank and waste treated.
Neutralizing Agent: N/A
Section 7. HANDLING AND STORAGE
Storage Temperature: Ambient
Storage Pressure: Atmospheric
General: In use the solution may undergo rapid exothermic decomposition if adequate volume per surface area relationship is not maintained. See Technical Data Sheet for more information. When opening drum, unscrew bung slowly, letting any pressure escape through loosened threads. Store in a cool place above 40 degrees F. Precipitation of ammonium bifluoride may occur at lower temperatures.
Section 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Engineering Controls: Local Exhaust ventilation is recommended. See section 2 for component exposure guidelines.
Personal Protection:
Respirator: Not normally required for the solution as shipped. Exposure to the working beath may require an acid gas respirator if ventilation is inadequate.
Hand Protection: Protective Gloves Recommended (plastic PVC or rubber).
Eye Protection: Use one of the following: Chemical Goggles or Full Face Shield.
Other Recommended: Use one of the following: Eye Bath, Safety Shower, Plastic Apron.
Note 1: In accordance with good industrial hygiene, wash hands with soap and water after working with material.
Safety Data Sheet 115-3851/115-3854
CircuitMedic, 22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 | Website: http://www.circuitmedic.com
CircuitMedic disclaims all liability associated with the use of this information.
Revision Date: May 10, 2016
Page 3 of 5 Pages/b>
Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Density: 1.12g/ml, 9.3Lb/gal
pH: N/A
Boiling Point: N/A
Freezing Point: N/A
Vapor Density (Air = 1): N/A
% Volatile By Weight: N/A
% Solids: 0%
Evaporation Rate (Butyl Acetate = 1: N/A
Solubility in Water: Complete
Viscosity: N/A
Molecular Weight: N/A
Physical State: Liquid
Molecular Weight: N/A
Appearance: Water white with slight odor
Vapor Pressure(mmHg): N/A
Section 10. STABILITY AND REACTIVITY
General: Unstable due to the possible decomposition of hydrogen peroxide into water and oxygen.
Incompatible materials and Conditions to Avoid: Metal containers, heat and reducing agents.
Hazardous Decomposition or Byproducts: Hydrofluoric acid, ammonia
Hazardous Polmerization: Will not occur.
Section 11. TOXICOLOGICAL INFORMATION
Results of Component Toxicity Test Performed: Information not available.
Human Experience: Information not available.
Section 12. ECOLOGICAL INFORMATION
Further Information: Information not available.
Section 13. DISPOSAL CONSIDERATIONS
RCRA 40 CFR 261 Classification: Federal, State, and Local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.
Safety Data Sheet 115-3851/115-3854
CircuitMedic, 22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 | Website: http://www.circuitmedic.com
CircuitMedic disclaims all liability associated with the use of this information.
Revision Date: May 10, 2016
Page 4 of 5 Pages
Section 14. TRANSPORT INFORMATION
DOT, IATA, ICAO, and IMO Description:
Basic Description: Tin/Lead Stripper
Proper Shipping Name: Corrosive Liquid Oxidizing, N.O.S. (Ammonium Hydrogen Fluoride)
Hazard Class: 8
Packaging Group: 111
UN Number: UN 3093
Label Requirements: Corrosive Oxidizer
Max. Shippable Qty.: 1 liter
Packaging: Meets Performance Oriented Packaging Requirements
Reportable Quantity (RQ): N/A
1996 NAERG Guide#: N/A
Limitations: Not shippable Via Air Transportation
Do not transfer to unmarked containers. Non-Regulated under D.O.T.
Section 15. REGULATORY INFORMATION
United States Federal Regulations:
MSDS complies with OSHA's Hazard Communication Rule, 29 CFR 1910.1200.
CERCLA/SUPERFUND,40 CFR 117, 302: None of the chemicals are Superfund hazards
SARA SUPERFUND AND REAUTHORIZATION ACT OF 1986 TITLE III Sections 302, 311, 312 and 313: Section 302 Extremely hazardous substances (40 CFR 355): None of the chemicals are Section 302 hazards.
Section 311/312 - Material Safety Data Sheet Requirements (40 CFR 370): By our hazard evaluation, this product is non-hazardous.
TOXIC SUBSTANCE CONTROL ACT (TSCA): All substances are TSCA Listed.
Section 311/312 - Material Safety Data Sheet Requirements (40 CFR 370): By our hazard evaluation, this product is non-hazardous.
TOXIC SUBSTANCE CONTROL ACT (TSCA): All substances are TSCA Listed.


International Regulations:
Canada Whims: NA
Europe EINECS Numbers: NA
Canadian Substance Inventory: One or more of the components of this product do not appear in the Canadian Substance Inventory.
Safety Data Sheet 115-3851/115-3854
CircuitMedic, 22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 | Website: http://www.circuitmedic.com
CircuitMedic disclaims all liability associated with the use of this information.
Revision Date: May 10, 2016
Page 5 of 5 Pages
Section 16. OTHER INFORMATION
Label Information:
European risk and Safety Phrases: N/A
European Symbols Needed: N/A
Canadian WHIMS Symbols: N/A
NFPA Hazard Rating: (1) Flammability (1) Health (0) Reactivity
Abbreviations Used in this Document: NE - Not Established, NA - Not Applicable/Not Available, NIF - No Information Found
References: Code of Federal Regulations (CFR)
The Sigma-Aldrich Library of Regulatory and Safety Data
Chemical Guide and OSHA Hazard Communication Standard
Various Federal, State & Local Regulations
To the best of our knowledge, the information contained herein is accurate. However, neither Circuit Technology Center, Inc., nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards which exist.