First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
Home | General | Kits | Parts | Guides | Sitemap
Parts & Materials
The following items have additional information listed on separate index pages.

Part No. Description Price Order
Various
part
Bonding Tips Various Sizes
Tips used to bond replacement conductors to circuit boards for repair.
$45.00 Each See Page
Various
part
Circuit Frames
Use to replace damaged surface mount pads and other conbductors.
Various See Page
Various
part
Color Agents
Use to tint the color of epoxy for solder mask repair or circuit base board repair.
$19.95 Each See Page
Various
part
Eyelets
Use to repair damaged plated holes.
$29.00/pkg 25 See Page
Various
part
Flextac Rework Stencils
Use to apply solder paste for BGA com ponent rework.
Various See Page
Various
part
Wire Dots
Wire tacking system used to bond jumper wires.
$39.95/pkg See Page
         
115-3136
part
Abrader
Mild abrasive for removing oxides and contaminates from conductive surfaces.
$7.95 Each
110-4602
part
Abrading Tip, Rubber
Silicon carbide impregnated rubber tip for mild abrading.
$3.95 Each
115-6064
part
Abrading Tip, Stone
Fine grit abrasive stone for grinding hard surfaces.
$5.95 Each
115-3702
part
Abrasive Pads
Light duty abrasive scrubbing pads to remove contamination and blend surfaces.
$6.95 Pkg/10
110-4302
part
Accessory Kit
A selection of tools and bits for use with the Micro-Drill System.
$54.95 Each
110-4303
part
Accessory Stand
Stand designed to hold Ball Mills and other small bits. Ball mills and bits not included.
$12.95 Each
235-1000-5
part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
$4.95 Pkg/5
510-2408
part
Alligator Clip
Use to provide ground connection.
$1.95 Each
115-6000
part
Ball Mill Pack - Sizes #1/2 - #7
Pack includes 8 carbide ball mills for precision drilling and grinding.
$31.95 Pkg/8
115-6001
part
Ball Mill, Carbide, #1, .031" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6050
part
Ball Mill, Carbide, #1/2, .027" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 each
115-6025
part
Ball Mill, Carbide, #1/4, .019" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 each
115-6002
part
Ball Mill, Carbide, #2, .039" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6003
part
Ball Mill, Carbide, #3, .047" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6004
part
Ball Mill, Carbide, #4, .055" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6005
part
Ball Mill, Carbide, #5, .063" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6006
part
Ball Mill, Carbide, #6, .071" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6007
part
Ball Mill, Carbide, #7, .083" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-6008
part
Ball Mill, Carbide, #8, .090" (2.300 mm) Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
$5.95 Each
115-2706
part
Bonding Film
Dry film adhesive used to bond lifted lands, pads and conductors.
$16.50 Each
115-3102
part
Bonding Iron, 120 VAC
Delivers the optimal heat for curing adhesive bonding film.
$109.00 Each
115-3103
part
Bonding Iron, 230 VAC
Delivers the optimal heat for curing adhesive bonding film.
$179.00 Each
115-2301
part
Bonding Tip, .010" x .080" (.25 mm x 2.03 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2201
part
Bonding Tip, .025" (.64 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2205
part
Bonding Tip, .035" (.89 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2306
part
Bonding Tip, .040" x .060" (1.02 mm x 1.52 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2308
part
Bonding Tip, .045" x .110" (1.14 mm x 2.79 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2310
part
Bonding Tip, .050" x .050" (1.27 mm x 1.27 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2202
part
Bonding Tip, .060" (1.52 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2312
part
Bonding Tip, .060" x .080" (1.52 mm x 2.03 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2204
part
Bonding Tip, .080" (2.03 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2316
part
Bonding Tip, .080" x .120" (2.03 mm x 3.05 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2318
part
Bonding Tip, .080" x .500" (2.03 x 12.70 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2320
part
Bonding Tip, .095" x .095" (2.41 mm x 2.41 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2206
part
Bonding Tip, .120" (3.05 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2322
part
Bonding Tip, .120" x .500" (3.05 mm x 12.70 mm)
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-2104
part
Bonding Tip, Tapered
Tip used to bond replacement conductors to circuit boards for repair.
$45.00 Each
115-3778
part
Buss Wire, 30 AWG
Used to create an electrical connection across conductive surfaces during plating.
$9.95 Each
115-3108 PCB
part
Circuit Board
Circuit board perfect for practice work.
$16.95 Each
115-3302
part
Circuit Bond Packs
Clear, superior strength epoxy in two-compartment plastic packages
$12.95 Each
115-5204
part
Circuit Track, .002" x .004"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5205
part
Circuit Track, .002" x .005"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5206
part
Circuit Track, .002" x .006"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5208
part
Circuit Track, .002" x .008"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5210
part
Circuit Track, .002" x .010"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5312
part
Circuit Track, .003" x .012"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5315
part
Circuit Track, .003" x .015"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5520
part
Circuit Track, .005" x .020"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
115-5530
part
Circuit Track, .005" x .030"
Rectangular shaped pure copper wire used to repair damaged conductors.
$39.95 Each
235-2106-5
part
Cleaning Brushes
Disposable brushes for use with solvents for cleaning and application of coatings.
$3.95 Pkg/5
250-1201
part
Coating Remover Pen
For precise removal of silicone, acrylic and urethane coatings from circuit boards.
$16.95 Each
115-4802
part
Collet, .125" (3.175 mm) Diameter
Replacement collet used to hold bits and tools with .125" (3.175 mm) diameter shanks.
$49.00 Each
115-9996
part
Color Agent - White
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9995
part
Color Agent, Black
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9293
part
Color Agent, Blue
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9424
part
Color Agent, Dark Gray
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9560
part
Color Agent, Dark Green
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9348
part
Color Agent, Green
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9561
part
Color Agent, Green
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9457
part
Color Agent, Light Brown
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9358
part
Color Agent, Light Green
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9376
part
Color Agent, Medium Green
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9185
part
Color Agent, Red
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
115-9102
part
Color Agent, Yellow
Use to tint epoxy for solder mask and base board repair.
$19.95 Each
245-1102
part
Conductive Pen
Pen dispenser for creating conductive silver traces.
$79.95 Each
110-4622
part
Cutoff Disk
Silicon carbide disc for precision cutting - .875" diameter x .023" thick.
$2.95 Pkg/4
115-7306-25
part
Eyelet, Flat Flange
Brass Eyelet - ID .030" OD .040" Length .093" Flange .060"
$29.00 Pkg/25
115-7206-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .020" OD .030" Length .094" Flange .046"
$29.00 Pkg/25
115-7209-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .020" OD .030" Length .120" Flange .046"
$29.00 Pkg/25
115-7336-25
part
Eyelet, Flat Flange
Brass Eyelet - ID .033" OD .047" Length .093" Flange .080"
$29.00 Pkg/25
115-7339-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .033" OD .047" Length .125" Flange .080"
$29.00 Pkg/25
115-7353-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .035" OD .047" Length .062" Flange .080"
$29.00 Pkg/25
115-7366-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .036" OD .046" Length .093" Flange .076"
$29.00 Pkg/25
115-7453-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .062" Flange .090"
$29.00 Pkg/25
115-7456-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .090" Flange .090"
$29.00 Pkg/25
115-7459-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .125" Flange .090"
$29.00 Pkg/25
115-7576-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .057" OD .067" Length .095" Flange .111"
$29.00 Pkg/25
115-7676-25
part
Eyelet, Flat Flange
Copper Eyelet - ID .067" OD .078" Length .097" Flange .130"
$29.00 Pkg/25
115-8359-25
part
Eyelet, Funnel Flange
Copper Eyelet - ID .035" OD .047" Length .118" Flange .080"
$29.00 Pkg/25
115-8431-25
part
Eyelet, Funnel Flange
Brass Eyelet - ID .043" OD .059" Length .156" Flange .095"
$29.00 Pkg/25
115-8559-25
part
Eyelet, Funnel Flange
Copper Eyelet - ID .055" OD .069" Length .126" Flange .095"
$29.00 Pkg/25
115-8736-25
part
Eyelet, Funnel Flange
Brass Eyelet - ID .073" OD .089" Length .093" Flange .125"
$29.00 Pkg/25
115-3132
part
File
High carbon steel needle file perfect for all kinds of detail work.
$9.95 Each
235-2102-100
part
Foam Swab
Ideal for absorbing cleaning solvents, and applying color agents and epoxies.
$49.50 Pkg/100
235-4010
part
Heat Shield Blanket, 5" x 7"
Self-adhering aluminized heat shield.
$24.95/Pkg 5
235-4060
part
Heat Shield Plates, 5" x 7"
Aluminum plates deflect heat to protect temperature sensitive areas.
$19.95/Pkg 5
235-3025
part
High Temp Tape Discs
High temperature polyimide tape discs, .25" diameter.
$5.95 Pkg/126
235-3050
part
High Temp Tape Discs
High temperature polyimide tape discs, .50" diameter.
$5.95 Pkg/60
355-0616
part
Knife Blade #16
This narrow tipped blade has the ideal profile for working on circuit boards.
$33.95 Pkg/100
355-0614
part
Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
$9.95 Each
115-9010
part
Mask, High Temperature
High temperature quick set liquid mask.
$49.95 Pkg/3
115-3115
part
Measuring Microscope Pen, 25X
Pocket pen microscope with measuring reticle.
$29.00 Each
355-3102-5
part
Micro Probes
Use to dispense a minute amount of adhesive and for micro-positioning of small objects.
$4.95 Pkg/5
115-3315-100
part
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
$9.50 Pkg/100
290-7250
part
Peel Test Tape
This tape is specifically designed to test plating adhesion.
$16.00 Each
115-3312
part
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
$9.50 Pkg/100
115-3733
part
Plating Anode Tip
Absorbent foam tip used with small plating anode.
$12.95 Pkg/10
115-3722
part
Plating Anode, Small
Small plating anode designed for circuit board plating.
$49.00 Each
115-3721
part
Plating Anode, Standard
Pre-wrapped, screw-on plating anode designed for circuit board plating.
$59.00 Each
115-3742
part
Plating Cables, Black/Red
Standard test lead cables with stackable banana plugs.
$15.95 Pair
115-3754
part
Plating Probe, Black
Nylon plating probe used for ground connection during plating.
$31.95 Each
115-3755
part
Plating Probe, Red
Nylon plating probe for use with plating anodes.
$31.95 Each
115-3841
part
Plating Solution, Electroclean, 1 oz (.03 liter)
Solution for preparation prior to electroplating.
$65.00 Each
115-3844
part
Plating Solution, Electroclean, 4 oz (.12 liter)
Solution for preparation prior to electroplating.
$165.00 Each
115-3821
part
Plating Solution, Gold, 1 oz (.03 liter)
Electroplating solution for gold surfaces and gold edge contacts.
$265.00 Each
115-3824
part
Plating Solution, Gold, 4 oz (.12 liter)
Electroplating solution for gold surfaces and gold edge contacts.
$695.00 Each
115-3831
part
Plating Solution, Nickel, 1 oz (.03 liter)
Electroplating solution for nickel surfaces and nickel edge contacts.
$65.00 Each
115-3834
part
Plating Solution, Nickel, 4 oz (.12 liter)
Electroplating solution for nickel surfaces and nickel edge contacts.
$165.00 Each
290-3050
part
Plating and Masking Tape
Ideal for masking during plating, coating removal and microblasting.
$14.00 Each
115-1714
part
Power Supply
Multi Voltage Regulated Power Supply
$99.00 Each
115-1716
part
Power Supply
Multi Voltage Regulated Power Supply
$99.00 Each
335-3195
part
Probe
Sharp dental style probe for manipulating small objects and removal of small debris.
$9.95 Each
115-3782
part
Rinse Bottle
4 ounce rinse bottle made from low-density polyethylene.
$14.95 Each
115-3764
part
Rinse Tray
Polypropylene container to catch runoff plating solutions.
$29.00 Each
335-3150
part
Scissors, 8"
Heavy duty 8" scissors with stainless steel blades and comfort plastic grips.
$9.95 Each
335-3197
part
Scraper
Hardened stainless steel tip for scraping solder mask and removing defects.
$9.95 Each
110-4502
part
Screw Mandrel
Use in handpieces to hold cutoff discs, brushes and polishing wheels.
$5.95 Each
115-3120
part
Setting Tool
Used to properly form eyelets used to repair plated holes in circuit boards.
$16.95 each
115-3504
part
Squeegee Blade, 12mm Wide
Stainless steel squeegee blade used to spread solder paste.
$12.95 Pkg/3
115-3506
part
Squeegee Blade, 27mm Wide
Stainless steel squeegee blade used to spread solder paste.
$12.95 Pkg/3
115-3508
part
Squeegee Blade, 35mm Wide
Stainless steel squeegee blade used to spread solder paste.
$12.95 Pkg/3
115-3502
part
Squeegee Handle
Handle holds squeegee blades used to spread solder paste.
$6.50 Each
115-3902
part
Syringes
Polypropylene syringe barrels with stainless steel dispensing tips.
$7.95 Pkg/3
290-2075
part
Tape, High Temperature
High Temperature Tape, .75" wide x 36 yards long
$24.50 Each
110-4504
part
Threaded Mandrel
For use with rubberized abrasives tips.
$5.95 Each
115-3122
part
Tool Base
Support base for Setting Tool when forming eyelets for plated hole repair.
$9.95 Each
115-3139
part
Tool Grip
Handy tool has vise jaws to grip small items.
$29.00 Each
335-5188
part
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
$9.95 Each
335-5185
part
Tweezer, Point Tip
Fine point tweezers for precision work.
$9.95 Each
335-3196
part
Wire Guide
Use to form bends in wires and hold wires during soldering and bonding.
$9.95 Each