First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
Home | General | Kits | Parts | Guides | Sitemap
201-1120 Gold Contact Repair Kit
Special Instructions
  1. 201-1120 Gold Contact Repair Kit
    This kit has everything you need to replace damaged gold edge contacts.

  2. The Bonding Iron will take 20 minutes to fully heat up. You should plug in the Bonding Iron at the start of the repair/rework procedure.

  3. The Bonding Iron operates at high temperature. Observe necessary precautions to prevent injury.

  4. When changing the Bonding Tip, allow 1 minute for tip temperature to stabilize.

  5. For detailed step by step procedures for repair of gold edge contacts, see the Instruction Guides below.

Circuit Bond
  1. Circuit Bond is a clear, low viscosity, superior strength epoxy, precisely measured out into two-compartment plastic packages.

  2. Circuit Bond is easy to use and there's no measuring.

  3. Has a working pot life of 30 minutes so it should not be mixed until ready to use.

  4. 201-1120 Gold Contact Repair Kit
    To use the Circuit Bond, remove the plastic clip separating the resin and hardener. Use the plastic clip to move the contents from one half of the package to the other. We recommend 50 - 100 strokes to thoroughly mix the contents. After mixing, cut a corner off the package and dispense the contents into a Plastic Cup. NOTE: The mixed epoxy may contain bubbles from the mixing process.

  5. Review the various Instruction Guides below for detailed step by step repair procedures.

Instruction Guides
The tools and materials included with the 201-1120 Gold Contact Repair Kit are used to complete the following.

4.6.1 Edge Contact Repair, Adhesive Method
4.6.1 Edge Contact Repair, Adhesive Method
Covers how to repair damaged edge contacts using liquid adhesive.
4.6.2 Edge Contact Repair, Film Adhesive
4.6.2 Edge Contact Repair, Film Adhesive
Covers how to repair damaged edge contacts using new contacts and film adhesive.
Gold Contact Repair Kit Includes

CircuitMedic Part
Abrader
Mild abrasive for removing oxides and contaminates from conductive surfaces.
CircuitMedic Part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
CircuitMedic Part
Bonding Film
Dry film adhesive used to bond lifted lands, pads and conductors.
CircuitMedic Part
Bonding Iron, 120 VAC
Delivers the optimal heat for curing adhesive bonding film.
CircuitMedic Part
Bonding Tip, Tapered
Tip used to bond replacement conductors to circuit boards for repair.
CircuitMedic Part
Bonding Tip, .080" x .500" (2.03 x 12.70 mm)
Tip used to bond replacement conductors to circuit boards for repair.
CircuitMedic Part
Bonding Tip, .120" x .500" (3.05 mm x 12.70 mm)
Tip used to bond replacement conductors to circuit boards for repair.
CircuitMedic Part
Circuit Bond Packs
Clear, superior strength epoxy in two-compartment plastic packages
Circuit Frame
Circuit Frame CC050060AG
Replacement circuits with a dry-film adhesive backing.
Circuit Frame
Circuit Frame CC070080AG
Replacement circuits with a dry-film adhesive backing.
CircuitMedic Part
Cleaning Brushes
Disposable brushes for use with solvents for cleaning and application of coatings.
CircuitMedic Part
File
High carbon steel needle file perfect for all kinds of detail work.
CircuitMedic Part
Foam Swab
Ideal for absorbing cleaning solvents, and applying color agents and epoxies.
CircuitMedic Part
High Temp Tape Discs
High temperature polyimide tape discs, .25" diameter.
CircuitMedic Part
High Temp Tape Discs
High temperature polyimide tape discs, .50" diameter.
CircuitMedic Part
Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
CircuitMedic Part
Micro Probes
Use to dispense a minute amount of adhesive and for micro-positioning of small objects.
CircuitMedic Part
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
CircuitMedic Part
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
CircuitMedic Part
Probe
Sharp dental style probe for manipulating small objects and removal of small debris.
CircuitMedic Part
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
CircuitMedic Part
Tweezer, Point Tip
Fine point tweezers for precision work.