First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
Home | General | Kits | Parts | Guides | Sitemap
201-3110 Base Board Repair Kit
Special Instructions
  1. 201-3110 Base Board Repair Kit
    Most types of damage to base board material can be repaired with this versatile repair kit. The kit includes adhesives, color agents, and alcohol swabs.

  2. For detailed step by step procedures for repair of base board and coatings, see the Instruction Guides below.

Circuit Bond
  1. Circuit Bond is a clear, low viscosity, superior strength epoxy, precisely measured out into two-compartment plastic packages.

  2. 201-3110 Base Board Repair Kit
    Circuit Bond is easy to use and there's no measuring.

  3. Has a working pot life of 30 minutes so it should not be mixed until ready to use.

  4. To use the Circuit Bond, remove the plastic clip separating the resin and hardener. Use the plastic clip to move the contents from one half of the package to the other. We recommend 50 - 100 strokes to thoroughly mix the contents. After mixing, cut a corner off the package and dispense the contents into a Plastic Cup. NOTE: The mixed epoxy may contain bubbles from the mixing process.

Instruction Guides
The tools and materials included with the 201-3110 Base Board Repair Kit are used to complete the following.

2.4.1 Coating Replacement, Solder Mask
2.4.1 Coating Replacement, Solder Mask
Covers methods to replace solder mask.
2.5 Baking and Preheating
2.5 Baking and Preheating
Covers baking and preheating of circuit boards.
2.7 Epoxy Mixing and Handling
2.7 Epoxy Mixing and Handling
Covers how to properly mixing and handling liquid epoxy used throughout these guides.
3.1 Delamination/Blister  Repair
3.1 Delamination/Blister Repair
Covers repair of blisters in circuit board base materials.
3.3.1 Hole Repair, Epoxy Method
3.3.1 Hole Repair, Epoxy Method
Covers how to repair minor damage to non-plated holes.
3.4.1 Key and Slot Repair, Epoxy Method
3.4.1 Key and Slot Repair, Epoxy Method
Covers how to repair minor damage to key and slot openings.
3.5.1 Base Material Repair, Epoxy Method
3.5.1 Base Material Repair, Epoxy Method
Covers how to repair minor damage to circuit base board material.
Base Board Repair Kit Includes

CircuitMedic Part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
CircuitMedic Part
Circuit Bond Packs
Clear, superior strength epoxy in two-compartment plastic packages
CircuitMedic Part
Cleaning Brushes
Disposable brushes for use with solvents for cleaning and application of coatings.
CircuitMedic Part
Color Agent, Green
Use to tint epoxy for solder mask and base board repair.
CircuitMedic Part
Color Agent, Light Green
Use to tint epoxy for solder mask and base board repair.
CircuitMedic Part
Foam Swab
Ideal for absorbing cleaning solvents, and applying color agents and epoxies.
CircuitMedic Part
Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
CircuitMedic Part
Measuring Microscope Pen, 25X
Pocket pen microscope with measuring reticle.
CircuitMedic Part
Micro Probes
Use to dispense a minute amount of adhesive and for micro-positioning of small objects.
CircuitMedic Part
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
CircuitMedic Part
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
CircuitMedic Part
Probe
Sharp dental style probe for manipulating small objects and removal of small debris.
CircuitMedic Part
Scraper
Hardened stainless steel tip for scraping solder mask and removing defects.
CircuitMedic Part
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
CircuitMedic Part
Tweezer, Point Tip
Fine point tweezers for precision work.