First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
Home | General | Kits | Parts | Guides | Sitemap
201-3130 Circuit Track Kit
Special Instructions
  1. 201-3130 Circuit Track Kit
    Circuit Tracks are rectangular shaped conductors made of 99.9% pure CDA 11000 copper.

  2. These rectangular ribbons closely conform to the original conductor dimensions. The replacement Circuit Track is bonded in place using prepackaged adhesive included in the kit.

  3. For detailed step by step procedures for repair of conductors see the Instruction Guides below.

Circuit Bond
  1. Circuit Bond is a clear, low viscosity, superior strength epoxy, precisely measured out into two-compartment plastic packages.

  2. Circuit Bond is easy to use and there's no measuring.

  3. Has a working pot life of 30 minutes so it should not be mixed until ready to use.

  4. 201-3130 Circuit Track Kit
    To use Circuit Bond, remove the plastic clip separating the resin and hardener. Use the plastic clip to move the contents from one half of the package to the other. We recommend 50 - 100 strokes to thoroughly mix the contents. After mixing, cut a corner off the package and dispense the contents into a Plastic Cup. NOTE: The mixed epoxy may contain bubbles from the mixing process.

Instruction Guides
The tools and materials included with the 201-3130 Circuit Track Kit are used to complete the following.

4.2.1 Conductor Repair, Foil Jumper
4.2.1 Conductor Repair, Foil Jumper
Covers how to repair a damaged conductor using a foil jumper.
4.2.2 Conductor Repair, Foil Jumper
4.2.2 Conductor Repair, Foil Jumper
Covers how to repair a damaged conductor using a foil jumper and film adhesive.
Circuit Track Kit Includes

CircuitMedic Part
Abrader
Mild abrasive for removing oxides and contaminates from conductive surfaces.
CircuitMedic Part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
CircuitMedic Part
Circuit Bond Packs
Clear, superior strength epoxy in two-compartment plastic packages
CircuitMedic Part
Circuit Track, .002" x .005"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Circuit Track, .002" x .008"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Circuit Track, .002" x .010"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Circuit Track, .003" x .015"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Circuit Track, .005" x .020"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Circuit Track, .005" x .030"
Rectangular shaped pure copper wire used to repair damaged conductors.
CircuitMedic Part
Cleaning Brushes
Disposable brushes for use with solvents for cleaning and application of coatings.
CircuitMedic Part
Foam Swab
Ideal for absorbing cleaning solvents, and applying color agents and epoxies.
CircuitMedic Part
High Temp Tape Discs
High temperature polyimide tape discs, .50" diameter.
CircuitMedic Part
Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
CircuitMedic Part
Measuring Microscope Pen, 25X
Pocket pen microscope with measuring reticle.
CircuitMedic Part
Micro Probes
Use to dispense a minute amount of adhesive and for micro-positioning of small objects.
CircuitMedic Part
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
CircuitMedic Part
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
CircuitMedic Part
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
CircuitMedic Part
Tweezer, Point Tip
Fine point tweezers for precision work.