First-Aid Kits for Circuit Boards ®
Newsletter | Ordering | Login
Phone: 978-373-1600
Home | General | Kits | Parts | Guides | Sitemap
201-3140 Plated Hole Repair Kit
Special Instructions
  1. 201-3140 Plated Hole Repair Kit
    Figure 1. Flare the eyelet.
    Eyelets are available with a flat flange or funnel flange.

  2. Note: Use caution when working on circuit board with inner layers.

  3. Place one Setting Tool into the Tool Base. The cone shaped end should be inserted into the Tool Base.

  4. Place the other Setting Tool into the Tool Grip with the cone shaped end out.

  5. 201-3140 Plated Hole Repair Kit
    Figure 2. Flat set the eyelet.
    If needed, drill out the hole removing all the plating. The drilled hole should be .025 - .125 mm (.001" - .005") larger than the eyelet OD.

  6. Insert the Eyelet into the circuit board and flare the eyelet end into a funnel shape. Apply light and even pressure. (See Figure 1).

  7. Flip the Setting Tool around in the Tool Grip and flat set the Eyelet. Apply firm pressure to flat set the Eyelet. (See Figure 2).

  8. Review the various Instruction Guides below for detailed step by step repair procedures.

Instruction Guides
The tools and materials included with the 201-3140 Plated Hole Repair Kit are used to complete the following.

5.1 Plated Hole Repair, No Inner Layer Connection
5.1 Plated Hole Repair, No Inner Layer Connection
Covers how to repair damaged plated holes.
5.2 Plated Hole Repair, Double Wall Method
5.2 Plated Hole Repair, Double Wall Method
Covers how to repair damaged plated holes.
5.3 Plated Hole Repair, Inner Layer Connection
5.3 Plated Hole Repair, Inner Layer Connection
Covers how to repair damaged plated holes.
Plated Hole Repair Kit Includes

CircuitMedic Part
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
CircuitMedic Part
Ball Mill Pack - Sizes #1/2 - #7
Pack includes 8 carbide ball mills for precision drilling and grinding.
CircuitMedic Part
Eyelet, Flat Flange
Copper Eyelet - ID .020" OD .030" Length .094" Flange .046"
CircuitMedic Part
Eyelet, Flat Flange
Brass Eyelet - ID .030" OD .040" Length .093" Flange .060"
CircuitMedic Part
Eyelet, Flat Flange
Brass Eyelet - ID .033" OD .047" Length .093" Flange .080"
CircuitMedic Part
Eyelet, Flat Flange
Copper Eyelet - ID .036" OD .046" Length .093" Flange .076"
CircuitMedic Part
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .090" Flange .090"
CircuitMedic Part
Eyelet, Flat Flange
Copper Eyelet - ID .057" OD .067" Length .095" Flange .111"
CircuitMedic Part
Eyelet, Flat Flange
Copper Eyelet - ID .067" OD .078" Length .097" Flange .130"
CircuitMedic Part
Eyelet, Funnel Flange
Brass Eyelet - ID .073" OD .089" Length .093" Flange .125"
CircuitMedic Part
Measuring Microscope Pen, 25X
Pocket pen microscope with measuring reticle.
CircuitMedic Part
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
CircuitMedic Part
Setting Tool
Used to properly form eyelets used to repair plated holes in circuit boards.
CircuitMedic Part
Tool Base
Support base for Setting Tool when forming eyelets for plated hole repair.
CircuitMedic Part
Tool Grip
Handy tool has vise jaws to grip small items.
CircuitMedic Part
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
CircuitMedic Part
Tweezer, Point Tip
Fine point tweezers for precision work.