First-Aid Kits for Circuit Boards ®
About Us  |   Free Newsletter  |   Contact Us
Phone: 978-373-1600
B6-479-3535-127 CircuitMedic BGA Rework Stencil

Shown 2X Actual Size

CircuitMedic Stencils are self-sticking solder paste stencils. These laser cut, polymer stencils use a full-release, residue-free adhesive similar to sticky notes. The self-sticking adhesive on the bottom of the stencil seals around each BGA pad to ensure that solder paste will not bleed under the stencil when the paste is applied. Disposable CircuitMedic Stencils are easy to use and will not leave any residue on the board surface.

If you currently use metal stencils you need to fixture them or tape them in position to hold them in place. Metal stencils can warp, and if the circuit board has undulations in the board surface, the metal stencil will not sit flat. Since there is no gasket-like seal, solder paste can easily bleed under metal stencils when paste is applied with a squeegee. Also solder paste can spill out over the sides of flat stencils contaminating the circuit board surface.

More Information
   See Full CircuitMedic BGA Rework Stencil Selection

Ordering Information
   Flextac Stencils may be ordered from distributors around the world. See our Distributor List.
   To order online click the "Order" button below and follow the on screen instructions.

US Patent number: 6,253,675

Free Newsletter
The most valuable tool in your repair department is high quality information. Get a subscription to Circuit Rework News.
Freight, duties, and value added taxes may increase prices for products outside USA.

Part No. Thickness Aperture Balls Pitch Component 1 - 3 Pkgs 4 - 7 Pkgs 8 - Up Pkgs Order
B6-479-3535-127 .006" (0.152 mm) .025" (0.635 mm) 479 .050" (1.27 mm) 35 mm x 35 mm $59.50 Pkg/10 $57.00 Pkg/10 $54.00 Pkg/10
22 Parkridge Road, Haverhill, MA 01835 USA
Phone: 978-373-1600 - Fax: 978-372-5700
Division of Circuit Technology Center, Inc.
Copyright © 2014 All rights reserved.

ISO9000:2008 Certified
Member Since 1986