115-1322 Circuit Bond Kit
|■||Two-compartment packaging eliminates mixing errors.|
|■||High strength/high temperature epoxy withstands demanding physical environments.|
|■||Clear, can be tinted with coloring agents.|
|■||Includes Foam Swabs and Alcohol Swabs for preparation and cleaning. |
|■||Includes Micro Probes, ideal for dispensing a tiny volume of adhesive.|
The Circuit Bond Kit contains 10 packages of clear, low viscosity, superior strength epoxy, precisely measured out into two-compartment plastic packages. This adhesive is easy to use and there's no measuring.
Once cured, this epoxy makes an effective electrical insulator with good high temperature, mechanical and impact resistance properties. Circuit Bond can be used to bond replacement conductors, repair burns and circuit board surface defects, and many other high strength, high temperature applications.
You can also tint Circuit Bond using Color Agents for the perfect cosmetic match.
Ship FedEx and UPS Only.
|Circuit Bond Specifications|
|Packaging||2 gram pre-measured packages|
|Mix ratio||4 parts resin to 1 part hardener|
|Pot life||30 minutes|
|Cure cycle||24 hours at room temperature or 4 hours @ 149°F (65°C)|
|Viscosity (after mixing)||2000 cps|
|Operating temperature range||-67°F to 275°F (-55°C to 135°C)|
|Hardness||88 Shore D|
|Dielectric strength||400 volts/mil|
|Shelf Life||6 months minimum|
||Circuit Bond Kit
To order click the "Order" button and follow the instructions.
You may also order from distributors around the world.