115-1322 Circuit Bond Kit |
INS 115-1322 |
| Qty |
Part No. |
Description |
| 10 |
115-3302 |
Circuit Bond Epoxy |
| Pkg/5 |
235-2102-5 |
Foam Swab, Small |
| Pkg/5 |
235-2108-5 |
Foam Swab, Large |
| Pkg/5 |
355-3102-5 |
Micro Probes |
| 2 Pkg/5 |
115-3315-5 |
Mixing Picks |
| 2 Pkg/5 |
115-3312-5 |
Plastic Cup |
The Circuit Bond Kit contains ten packages of clear, low viscosity, superior strength epoxy, precisely measured into two-compartment plastic packages. This adhesive is easy to use, and there's no measuring.
Once cured, this epoxy makes an effective electrical insulator with good high-temperature, mechanical, and impact resistance properties. Circuit Bond can be used to bond replacement conductors, repair burns and circuit board surface defects, and many other high-strength, high-temperature applications.
You can also tint Circuit Bond using Color Agents for the perfect cosmetic match.
- Two-compartment packaging eliminates mixing errors.
- High strength/high-temperature epoxy withstands demanding physical environments.
- Clear, can be tinted with coloring agents.
- Includes Foam Swabs for preparation and cleaning.
- Includes Micro Probes, ideal for dispensing a tiny volume of adhesive.
| Packaging | 2 gram pre-measured packages |
| Mix ratio | 4 parts resin to 1 part hardener |
| Color | Clear, transparent |
| Pot life | 30 minutes |
| Cure cycle | 24 hours at room temperature or 4 hours @ 149°F (65°C) |
| Viscosity (after mixing) | 2000 cps |
| Operating temperature range | -67°F to 275°F (-55°C to 135°C) |
| Hardness | 88 Shore D |
| Dielectric strength | 400 volts/mil |
| Shelf Life | 6 months minimum. |
| Shipping | Shipping by FedEx and UPS only. |
|
