|
115-5205 Circuit Track, 0.002" x 0.005" (0.051 mm x 0.127 mm)
Rectangular copper circuit track used to repair damaged PCB conductors and traces. Made from high-conductivity 99.9% pure CDA 11000 copper and supplied in a 36" spool. These rectangular ribbons closely conform to the original conductor dimensions. The replacement Circuit Track is bonded in place using epoxy.
CDA 11000 is electrolytic tough pitch copper that is intentionally alloyed with oxygen to achieve the best combination of conductivity and capacity for being cold worked.
All Circuit Tracks
| Specifications |
| Property |
Value |
| Alloy Name |
ETP Copper |
| Chemical Composition |
99.90 Cu Min. /.04 O |
| Density (lbs./in.3) |
.323 |
| Electrical Conductivity (% IACS @ 68°F ) |
100 |
| Resistivity (O/circ. mil/ft) |
10.3 |
| Approximate Melting Point (° F ) |
1981 |
| Tensile Strength Hard Temper (kpsi) |
55 |
| Tensile Strength Soft Temper (kpsi) |
34 |
| Yield Strength Hard Temper (kpsi) |
50 |
| Yeild Strength Soft Temper (kpsi) |
12 |
| Elongation Hard Temper (%) |
5 |
| Elongation Soft Temper (%) |
36 |
| Properties are nominal values and should not be used for specification purposes. Elongation values are generally size-dependent. |
|
| Classifications |
| Harmonized Code |
7408.19.0000 |
| Export Administration Regulations (EAR) |
EAR99 |
| Export Control Classification Number (ECCN) |
Not Applicable |
|
