115-2403 Solder Wire, 010" Diameter, Leaded, 63/37

This flux-cored solder wire offers superior wetting performance for hand soldering. The small .010" (0.25 mm) diameter size is ideal when a small amount of solder is needed. All flux-cored solders have a shelf life. The limited 10' (3.05 mm) length in each package reduces the likelihood that the solder will be wasted as the solder's shelf life expires.

The flux chemistry is based on the same principles that have been used for years in mildly activated rosin solders. The solder design reduces spattering, a common issue with most cored fluxes, and yields visually acceptable solder joints without cleaning, while maintaining comparable soldering quality and efficiency to that obtained with mildly activated rosin flux. The flux is classified as ROL0 per J-STD-004.

Cleaning
The flux residues are non-corrosive, non-conductive, and do not require removal in most applications. IPA will not clean the residues off the surface of the circuit board after the soldering process. A saponifier or cleaning agent specifically designed to clean no-clean flux residues is recommended.

Specifications
Wire Diameter	0.010 in (0.25 mm)
Length	10 feet (3.05 mm)
Packaging	Small ESD-Safe spool bobbin
Alloy Name	Tin/Lead
Alloy Composition	63/37 (63% Tin, 37% Lead)
Flux %	1.1 %
Flux Type	No Clean
Lead Free	No
Halogen Content	Contains Halogen
Core Size	50
Melting Point	183 C (361 F)
Shelf Life	2 years minmum

DATA SHEET