115-7366-25 Eyelet, Flat Flange
|
Eyelets are used to repair plated holes in circuit boards, and also to create a conductive path through circuit boards for various applications.
All eyelets are manufactured from copper or brass, and have a bright tin plating.
|
| Flange Type |
Flat |
| Metal |
Copper |
| Inside Diameter - ID |
.036" |
| Outside Diameter - OD |
.046" |
| Length Under Flange - LUF |
.093" |
| Flange Diameter - FD |
.076" |
| Dimensions are plus or minus .003" |
|
|
|
| No. |
Description |
Price |
Qty / Order |
| 115-3120 |
Setting Tool, Hand
Use to set eyelets by hand using Tool Base and Tool Grip. |
$17.95 Each * |
|
| 115-3120 |
Setting Tool, Small
Use to set eyelets up to .045" ID using #110-5202 Eyelet Press. |
$17.95 Each * |
|
| 115-3126 |
Setting Tool, Large
Use to set eyelets greater than .045" ID using #110-5202 Eyelet Press. |
$69.95 Each * |
|
|
* Two tools needed to form eyelets. Harmonize Code: 8207.19.5030
|
|
|
|
|
|
|
|
Tool Base
Support base for Setting Tool when forming eyelets for plated hole repair.
|
|
|
Setting Tool, Small
Used to properly form eyelets used to repair plated holes in circuit boards.
|
[an error occurred while processing this directive]
|
|
Setting Tool, Large
Used to properly form eyelets used to repair plated holes in circuit boards.
|
|
|
Eyelet Press
Heavy duty eyelet press designed to set and form eyelets in circuit boards.
|
|
|
Professional Repair Kit
Kit to repair circuit board damage including pads, lands, conductors, base material and plated holes.
|
|
|
|
|
|
Next, apply firm even pressure using the opposite flat end of the setting tool to flatten the eyelet barrel.
