Cutting and Grinding Tools
|
Machining abrasive circuit board material requires the proper cutting tools. All Ball Mills are carbide-tipped for clean cutting and long life.
The ball mills, abrasives, and cutting tools from Circuit Medic have been field tested and specially selected for the demands of intricate and delicate circuit board work. Below is a selection of cutting tools and abrasives. Click the individual items for more information.
|
| Part Number |
Description |
Price |
Qty / Order
|
| 115-6064 |
Abrading Tip, Stone
Fine grit abrasive stone for grinding hard surfaces. |
$6.00 Each |
|
| 110-4303 |
Accessory Stand
Stand to hold Ball Mills and other small bits. Ball mills and bits not included. |
$18.00 Each |
|
| 115-6000 |
Ball Mill Pack, Sizes #1/2, #1 - #7
Pack includes 8 carbide ball mills for precision drilling and grinding. |
$42.00 Pkg/8 |
|
| 115-6001-5 |
Ball Mill, Carbide, #1, .031" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6050-5 |
Ball Mill, Carbide, #1/2, .027" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6025-5 |
Ball Mill, Carbide, #1/4, .019" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6002-5 |
Ball Mill, Carbide, #2, .039" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6003-5 |
Ball Mill, Carbide, #3, .047" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6004-5 |
Ball Mill, Carbide, #4, .055" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6005-5 |
Ball Mill, Carbide, #5, .063" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6006-5 |
Ball Mill, Carbide, #6, .071" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6007-5 |
Ball Mill, Carbide, #7, .083" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 115-6008-5 |
Ball Mill, Carbide, #8, .090" (2.300 mm) Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects. |
$42.00 Pkg/5 |
|
| 110-4622 |
Cutoff Disk
Abrasive disc for precision cutting - .937" diameter x .025" thick. |
$3.00 Pkg/4 |
|
| 110-4504 |
Threaded Mandrel
For use with rubberized abrasives tips. |
$6.00 Each |
|
|
|
