115-5208 Circuit Track, .002" x .008" (.051 mm x .203 mm)

$42.00 Each
Circuit Track
It's now easier than ever to repair damaged circuits. Circuit Tracks are rectangular-shaped conductors made of 99.9% pure CDA 11000 copper. These rectangular ribbons closely conform to the original conductor dimensions. The replacement Circuit Track is bonded in place using epoxy.

CDA 11000 is electrolytic tough pitch copper that is intentionally alloyed with oxygen to achieve the best combination of conductivity and capacity for being cold worked. Circuit Tracks are used for various applications, including repairing damaged conductors on circuit boards.

Total length 36", packaged in a small bobbin spool.
Ordering
115-5208 115-5208 Circuit Track, .002" x .008" (.051 mm x .203 mm)
Specifications
PropertyValue
Alloy NameETP Copper
Chemical Composition99.90 Cu Min. /.04 O
Density (lbs./in.³).323
Electrical Conductivity (% IACS @ 68°F )100
Resistivity (O/circ. mil/ft)10.3
Approximate Melting Point (° F )1981
Tensile Strength Hard Temper (kpsi)55
Tensile Strength Soft Temper (kpsi)34
Yield Strength Hard Temper (kpsi)50
Yeild Strength Soft Temper (kpsi)12
Elongation Hard Temper (%)5
Elongation Soft Temper (%)36
Properties are nominal values and should not be used for specification purposes. Elongation values are generally size-dependent.
Classifications
Harmonize Code 7408.19.0000
Export Administration Regulations (EAR) EAR99
Export Control Classification Number (ECCN) Not Applicable
Contact Us Form
CONTACT US


Notes/Questions/Requests

Security Check

We're Here To Help.   
CONTACT US