115-5520 Circuit Track, .005" x .020" (.127 mm x .508 mm)
|
$42.00 Each
| 115-5520 Circuit Track, .005" x .020" (.127 mm x .508 mm) |
|
|
It's now easier than ever to repair damaged circuits. Circuit Tracks are rectangular-shaped conductors made of 99.9% pure CDA 11000 copper. These rectangular ribbons closely conform to the original conductor dimensions. The replacement Circuit Track is bonded in place using epoxy.
CDA 11000 is electrolytic tough pitch copper that is intentionally alloyed with oxygen to achieve the best combination of conductivity and capacity for being cold worked. Circuit Tracks are used for various applications, including repairing damaged conductors on circuit boards.
Total length 36", packaged in a small bobbin spool.
| Property | Value |
| Alloy Name | ETP Copper |
| Chemical Composition | 99.90 Cu Min. /.04 O |
| Density (lbs./in.³) | .323 |
| Electrical Conductivity (% IACS @ 68°F ) | 100 |
| Resistivity (Ω/circ. mil/ft) | 10.3 |
| Approximate Melting Point (° F ) | 1981 |
| Tensile Strength Hard Temper (kpsi) | 55 |
| Tensile Strength Soft Temper (kpsi) | 34 |
| Yield Strength Hard Temper (kpsi) | 50 |
| Yeild Strength Soft Temper (kpsi) | 12 |
| Elongation Hard Temper (%) | 5 |
| Elongation Soft Temper (%) | 36 |
Properties are nominal values and should not be
used for specification purposes. Elongation values
are generally size-dependent.
|
| Harmonize Code |
7408.19.0000 |
| Export Administration Regulations (EAR) |
EAR99 |
| Export Control Classification Number (ECCN) |
Not Applicable |
|
Order direct or from a distributor. Freight, duties, and value added taxes may increase prices for products outside the USA.
|
|
|
|
|
![[unknown placeholder $article.title$]](https://www.circuitmedic.com/web2/1/circuit-track-160120.jpg)
