| Part Number |
Description |
Price |
Qty / Order
|
| 235-2102-5 |
235-2102-5 Foam Swab, Small
Swabs for use with solvents and application of color agents and epoxies. |
$9.50 Pkg/5 |
|
| 115-3136 |
115-3136 Abrader
Mild abrasive for removing oxides and contaminants. |
$7.95 Each |
|
| 235-2106-5 |
235-2106-5 Cleaning Brushes
Disposable brushes for solvent cleaning and application of coatings. |
$10.95 Pkg/5 |
|
| 290-3050 |
290-3050 Tape, Plating/Masking
Ideal for masking during plating, coating removal and microblasting. |
$14.00 Each |
|
| 115-3702 |
115-3702 Abrasive Pads
Light duty abrasive scrubbing pads to remove contamination and blend surfaces. |
$6.95 Pkg/10 |
|
| 510-2408 |
510-2408 Alligator Clip
Use to provide ground connection. |
$1.95 Each |
|
| 245-1102 |
245-1102 Conductive Pen
Pen dispenser for creating conductive silver traces. |
$79.95 Each |
|
| 115-3742 |
115-3742 Plating Cables, Black/Red
Standard test lead cables with stackable banana plugs. |
$29.95 Pair |
|
| 115-3754 |
115-3754 Plating Probe, Black
Nylon plating probe used for ground connection during plating. |
$52.95 Each |
|
| 115-3755 |
115-3755 Plating Probe, Red
Nylon plating probe for use with plating anodes. |
$52.95 Each |
|
| 115-3721 |
115-3721 Plating Anode, Standard
Pre-wrapped, screw-on plating anode designed for circuit board plating. |
$59.00 Each |
|
| 115-3722 |
115-3722 Plating Anode, Small
Small plating anode designed for circuit board plating. |
$49.00 Each |
|
| 115-3733 |
115-3733 Plating Anode Tip
Absorbent foam tip used with small plating anode. |
$12.95 Pkg/10 |
|
| 115-1714 |
115-1714 Power Supply
Multi Voltage Regulated Power Supply |
$99.00 Each |
|
| 290-7250 |
290-7250 Tape, Peel Test
This tape is specifically designed to test plating adhesion. |
$29.95 Each |
|
| 115-3782 |
115-3782 Rinse Bottle
4 ounce rinse bottle made from low-density polyethylene. |
$14.95 Each |
|
| 115-3764 |
115-3764 Rinse Tray
Polypropylene container to catch runoff plating solutions. |
$29.00 Each |
|
| 115-3778 |
115-3778 Buss Wire, 30 AWG, 36 Inch
Used to create an electrical connection across conductive surfaces during plating. Length 36 inches. |
$9.95 Each |
|
| 335-3197 |
335-3197 Scraper, Curved Tip
Hardened stainless steel tip for scraping solder mask and removing defects. |
$9.95 Each |
|
| 115-3821 |
115-3821 Plating Solution, Gold, 1 oz (.03 liter)
Electroplating solution for gold surfaces and gold edge contacts. |
$349.00 Each |
|
| 115-3824 |
115-3824 Plating Solution, Gold, 4 oz (.12 liter)
Electroplating solution for gold surfaces and gold edge contacts. |
$1149.00 Each |
|
| 115-3831 |
115-3831 Plating Solution, Nickel, 1 oz (.03 liter)
Electroplating solution for nickel surfaces and nickel edge contacts. |
$95.00 Each |
|
| 115-3834 |
115-3834 Plating Solution, Nickel, 4 oz (.12 liter)
Electroplating solution for nickel surfaces and nickel edge contacts. |
$195.00 Each |
|
| 115-3841 |
115-3841 Plating Solution, Electroclean, 1 oz (.03 liter)
Solution for preparation prior to electroplating. |
$95.00 Each |
|
| 115-3844 |
115-3844 Plating Solution, Electroclean, 4 oz (.12 liter)
Solution for preparation prior to electroplating. |
$195.00 Each |
|
| 290-2075 |
290-2075 Tape, High Temperature
High Temperature Tape, .75" wide x 36 yards long |
$24.50 Each |
|
| 115-1716 |
115-1716 Power Supply
Multi Voltage Regulated Power Supply |
$99.00 Each |
|
| 235-2108-5 |
235-2108-5 Foam Swab, Large
Swabs for use with solvents and application of color agents and epoxies. |
$13.95 Pkg/5 |
|
