| 110-4211 |
110-4211
Handpiece used with 110-4105 Micro-Drill System
|
299.00 Each |
|
| 110-4213 |
110-4213
110-4213 Square Carbon Brushes
|
$29.50 Pkg/2 |
|
| 115-3136 |
Abrader
Mild abrasive for removing oxides and contaminates from conductive surfaces.
|
$7.95 Each |
|
| 110-4602 |
Abrading Tip, Rubber
Silicon carbide impregnated rubber tip for mild abrading.
|
$3.95 Each |
|
| 115-6064 |
Abrading Tip, Stone
Fine grit abrasive stone for grinding hard surfaces.
|
$5.95 Each |
|
| 115-3702 |
Abrasive Pads
Light duty abrasive scrubbing pads to remove contamination and blend surfaces.
|
$6.95 Pkg/10 |
|
| 110-4302 |
Accessory Kit
A selection of tools and bits for use with the Micro-Drill System.
|
$54.95 Each |
|
| 110-4303 |
Accessory Stand
Stand designed to hold Ball Mills and other small bits. Ball mills and bits not included.
|
$12.95 Each |
|
| 235-1000-5 |
Alcohol Swab
Self-saturating Isopropyl alcohol swab. Squeeze handle to release alcohol.
|
$4.95 Pkg/5 |
|
| 510-2408 |
Alligator Clip
Use to provide ground connection.
|
$1.95 Each |
|
| 115-6000 |
Ball Mill Pack - Sizes #1/2 - #7
Pack includes 8 carbide ball mills for precision drilling and grinding.
|
$31.95 Pkg/8 |
|
| 115-6001 |
Ball Mill, Carbide, #1, .031" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6050 |
Ball Mill, Carbide, #1/2, .027" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 each |
|
| 115-6025 |
Ball Mill, Carbide, #1/4, .019" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 each |
|
| 115-6002 |
Ball Mill, Carbide, #2, .039" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6003 |
Ball Mill, Carbide, #3, .047" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6004 |
Ball Mill, Carbide, #4, .055" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6005 |
Ball Mill, Carbide, #5, .063" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6006 |
Ball Mill, Carbide, #6, .071" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6007 |
Ball Mill, Carbide, #7, .083" Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-6008 |
Ball Mill, Carbide, #8, .090" (2.300 mm) Diameter
Sharp carbide for precision drilling of plated holes and removal of surface defects.
|
$5.95 Each |
|
| 115-2706 |
Bonding Film
Dry film adhesive used to bond lifted lands, pads and conductors.
|
$16.50 Each |
|
| 115-3102 |
Bonding Iron, 120 VAC
Delivers the optimal heat for curing adhesive bonding film.
|
$109.00 Each |
|
| 115-3103 |
Bonding Iron, 230 VAC
Delivers the optimal heat for curing adhesive bonding film.
|
$179.00 Each |
|
| 115-3104 |
Bonding Station, 120 VAC
Delivers the optimal heat for curing adhesive bonding film.
|
$119.00 Each |
|
| 115-3105 |
Bonding Station, 230 VAC
Delivers the optimal heat for curing adhesive bonding film.
|
$119.00 Each |
|
| 115-2306 |
Bonding Tip, .040" x .060" (1.02 mm x 1.52 mm)
Tip used to bond replacement conductors to circuit boards for repair.
|
$45.00 Each |
|
| 115-2204 |
Bonding Tip, .080" (2.03 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
|
$45.00 Each |
|
| 115-2316 |
Bonding Tip, .080" x .120" (2.03 mm x 3.05 mm)
Tip used to bond replacement conductors to circuit boards for repair.
|
$45.00 Each |
|
| 115-2206 |
Bonding Tip, .120" (3.05 mm) Diameter
Tip used to bond replacement conductors to circuit boards for repair.
|
$45.00 Each |
|
| 115-2104 |
Bonding Tip, Tapered
Tip used to bond replacement conductors to circuit boards for repair.
|
$45.00 Each |
|
| 115-3778 |
Buss Wire, 30 AWG
Used to create an electrical connection across conductive surfaces during plating.
|
$9.95 Each |
|
| 115-3125 |
Calibration Thermocouple
Thermocouple used to calibrate Temperature Controller.
|
$179.00 |
|
| 115-3108 PCB |
Circuit Board
Circuit board perfect for practice work.
|
$16.95 Each |
|
| 115-3302 |
Circuit Bond Packs
Clear, superior strength epoxy in two-compartment plastic packages
|
$12.95 Each |
|
| 115-5204 |
Circuit Track, .002" x .004"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5205 |
Circuit Track, .002" x .005"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5206 |
Circuit Track, .002" x .006"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5208 |
Circuit Track, .002" x .008"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5210 |
Circuit Track, .002" x .010"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5312 |
Circuit Track, .003" x .012"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5315 |
Circuit Track, .003" x .015"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5520 |
Circuit Track, .005" x .020"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 115-5530 |
Circuit Track, .005" x .030"
Rectangular shaped pure copper wire used to repair damaged conductors.
|
$39.95 Each |
|
| 235-2106-5 |
Cleaning Brushes
Disposable brushes for use with solvents for cleaning and application of coatings.
|
$3.95 Pkg/5 |
|
| 250-1201 |
Coating Remover Pen
For precise removal of silicone, acrylic and urethane coatings from circuit boards.
|
$16.95 Each |
|
| 115-4802 |
Collet, .125" (3.175 mm) Diameter
Replacement collet used to hold bits and tools with .125" (3.175 mm) diameter shanks.
|
$49.00 Each |
|
| 115-9996 |
Color Agent - White
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9995 |
Color Agent, Black
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9293 |
Color Agent, Blue
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9424 |
Color Agent, Dark Gray
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9560 |
Color Agent, Dark Green
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9348 |
Color Agent, Green
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9561 |
Color Agent, Green
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9457 |
Color Agent, Light Brown
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9358 |
Color Agent, Light Green
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9376 |
Color Agent, Medium Green
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9185 |
Color Agent, Red
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 115-9102 |
Color Agent, Yellow
Use to tint epoxy for solder mask and base board repair.
|
$19.95 Each |
|
| 245-1102 |
Conductive Pen
Pen dispenser for creating conductive silver traces.
|
$79.95 Each |
|
| 110-4622 |
Cutoff Disk
Silicon carbide disc for precision cutting - .875" diameter x .023" thick.
|
$2.95 Pkg/4 |
|
| 115-7306-25 |
Eyelet, Flat Flange
Brass Eyelet - ID .030" OD .040" Length .093" Flange .060"
|
$29.00 Pkg/25 |
|
| 115-7206-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .020" OD .030" Length .094" Flange .046"
|
$29.00 Pkg/25 |
|
| 115-7209-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .020" OD .030" Length .120" Flange .046"
|
$29.00 Pkg/25 |
|
| 115-7336-25 |
Eyelet, Flat Flange
Brass Eyelet - ID .033" OD .047" Length .093" Flange .080"
|
$29.00 Pkg/25 |
|
| 115-7339-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .033" OD .047" Length .125" Flange .080"
|
$29.00 Pkg/25 |
|
| 115-7353-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .035" OD .047" Length .062" Flange .080"
|
$29.00 Pkg/25 |
|
| 115-7366-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .036" OD .046" Length .093" Flange .076"
|
$29.00 Pkg/25 |
|
| 115-7453-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .062" Flange .090"
|
$29.00 Pkg/25 |
|
| 115-7456-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .090" Flange .090"
|
$29.00 Pkg/25 |
|
| 115-7459-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .045" OD .059" Length .125" Flange .090"
|
$29.00 Pkg/25 |
|
| 115-7576-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .057" OD .067" Length .095" Flange .111"
|
$29.00 Pkg/25 |
|
| 115-7676-25 |
Eyelet, Flat Flange
Copper Eyelet - ID .067" OD .078" Length .097" Flange .130"
|
$29.00 Pkg/25 |
|
| 115-3132 |
File
High carbon steel needle file perfect for all kinds of detail work.
|
$9.95 Each |
|
| 235-2102-100 |
Foam Swab
Ideal for absorbing cleaning solvents, and applying color agents and epoxies.
|
$49.50 Pkg/100 |
|
| 235-4010 |
Heat Shield Blanket, 5" x 7"
Self-adhering aluminized heat shield.
|
$24.95/Pkg 5 |
|
| 235-4060 |
Heat Shield Plates, 5" x 7"
Aluminum plates deflect heat to protect temperature sensitive areas.
|
$19.95/Pkg 5 |
|
| 235-3025 |
High Temp Tape Discs
High temperature polyimide tape discs, .25" diameter.
|
$5.95 Pkg/126 |
|
| 235-3050 |
High Temp Tape Discs
High temperature polyimide tape discs, .50" diameter.
|
$5.95 Pkg/60 |
|
| 355-0616 |
Knife Blade #16
This narrow tipped blade has the ideal profile for working on circuit boards.
|
$33.95 Pkg/100 |
|
| 355-0614 |
Knife with #16 Blades
A must-have tool for precise cutting, scraping and trimming.
|
$9.95 Each |
|
| 115-9010 |
Mask, High Temperature
High temperature quick set liquid mask.
|
$49.95 Pkg/3 |
|
| 115-3115 |
Measuring Microscope Pen, 25X
Pocket pen microscope with measuring reticle.
|
$29.00 Each |
|
| 355-3102-5 |
Micro Probes
Use to dispense a minute amount of adhesive and for micro-positioning of small objects.
|
$4.95 Pkg/5 |
|
| 115-3315-100 |
Mixing Picks
Unique mixing sticks have a paddle shape on one and sharp pick on the opposite end.
|
$9.50 Pkg/100 |
|
| 290-7250 |
Peel Test Tape
This tape is specifically designed to test plating adhesion.
|
$16.00 Each |
|
| 115-3312 |
Plastic Cup
Small disposable cup for mixing epoxies and holding small items.
|
$9.50 Pkg/100 |
|
| 115-3733 |
Plating Anode Tip
Absorbent foam tip used with small plating anode.
|
$12.95 Pkg/10 |
|
| 115-3722 |
Plating Anode, Small
Small plating anode designed for circuit board plating.
|
$49.00 Each |
|
| 115-3721 |
Plating Anode, Standard
Pre-wrapped, screw-on plating anode designed for circuit board plating.
|
$59.00 Each |
|
| 115-3742 |
Plating Cables, Black/Red
Standard test lead cables with stackable banana plugs.
|
$15.95 Pair |
|
| 115-3754 |
Plating Probe, Black
Nylon plating probe used for ground connection during plating.
|
$31.95 Each |
|
| 115-3755 |
Plating Probe, Red
Nylon plating probe for use with plating anodes.
|
$31.95 Each |
|
| 115-3841 |
Plating Solution, Electroclean, 1 oz (.03 liter)
Solution for preparation prior to electroplating.
|
$65.00 Each |
|
| 115-3844 |
Plating Solution, Electroclean, 4 oz (.12 liter)
Solution for preparation prior to electroplating.
|
$165.00 Each |
|
| 115-3821 |
Plating Solution, Gold, 1 oz (.03 liter)
Electroplating solution for gold surfaces and gold edge contacts.
|
$265.00 Each |
|
| 115-3824 |
Plating Solution, Gold, 4 oz (.12 liter)
Electroplating solution for gold surfaces and gold edge contacts.
|
$695.00 Each |
|
| 115-3831 |
Plating Solution, Nickel, 1 oz (.03 liter)
Electroplating solution for nickel surfaces and nickel edge contacts.
|
$65.00 Each |
|
| 115-3834 |
Plating Solution, Nickel, 4 oz (.12 liter)
Electroplating solution for nickel surfaces and nickel edge contacts.
|
$165.00 Each |
|
| 290-3050 |
Plating and Masking Tape
Ideal for masking during plating, coating removal and microblasting.
|
$14.00 Each |
|
| 115-1714 |
Power Supply
Multi Voltage Regulated Power Supply
|
$99.00 Each |
|
| 115-1716 |
Power Supply
Multi Voltage Regulated Power Supply
|
$99.00 Each |
|
| 335-3195 |
Probe
Sharp dental style probe for manipulating small objects and removal of small debris.
|
$9.95 Each |
|
| 115-3782 |
Rinse Bottle
4 ounce rinse bottle made from low-density polyethylene.
|
$14.95 Each |
|
| 115-3764 |
Rinse Tray
Polypropylene container to catch runoff plating solutions.
|
$29.00 Each |
|
| 335-3150 |
Scissors, 8"
Heavy duty 8" scissors with stainless steel blades and comfort plastic grips.
|
$9.95 Each |
|
| 335-3197 |
Scraper
Hardened stainless steel tip for scraping solder mask and removing defects.
|
$9.95 Each |
|
| 110-4502 |
Screw Mandrel
Use in handpieces to hold cutoff discs, brushes and polishing wheels.
|
$5.95 Each |
|
| 115-3120 |
Setting Tool
Used to properly form eyelets used to repair plated holes in circuit boards.
|
$16.95 each |
|
| 115-3504 |
Squeegee Blade, 12mm Wide
Stainless steel squeegee blade used to spread solder paste.
|
$12.95 Pkg/3 |
|
| 115-3506 |
Squeegee Blade, 27mm Wide
Stainless steel squeegee blade used to spread solder paste.
|
$12.95 Pkg/3 |
|
| 115-3508 |
Squeegee Blade, 35mm Wide
Stainless steel squeegee blade used to spread solder paste.
|
$12.95 Pkg/3 |
|
| 115-3502 |
Squeegee Handle
Handle holds squeegee blades used to spread solder paste.
|
$6.50 Each |
|
| 115-3902 |
Syringes
Polypropylene syringe barrels with stainless steel dispensing tips.
|
$7.95 Pkg/3 |
|
| 290-2075 |
Tape, High Temperature
High Temperature Tape, .75" wide x 36 yards long
|
$24.50 Each |
|
| 110-4504 |
Threaded Mandrel
For use with rubberized abrasives tips.
|
$5.95 Each |
|
| 115-3122 |
Tool Base
Support base for Setting Tool when forming eyelets for plated hole repair.
|
$9.95 Each |
|
| 115-3139 |
Tool Grip
Handy tool has vise jaws to grip small items.
|
$29.00 Each |
|
| 335-5188 |
Tweezer, Crossover
Self locking stainless steel tweezers provide hands-free clamping force.
|
$9.95 Each |
|
| 335-5185 |
Tweezer, Point Tip
Fine point tweezers for precision work.
|
$9.95 Each |
|
| 335-3196 |
Wire Guide
Use to form bends in wires and hold wires during soldering and bonding.
|
$9.95 Each |
|
